9.0 foot: missed calls from Samsung Galaxy J7 2017 (Android Pie)

Remember that I have this phone for 2 years and a little more.
Recently, he began to reject calls (the operator generates a text message, "Missed call", and the caller must try again). That does not happen when the phone is in use.

Is there any software solution for this? I know that my SIM card is bad and that it is impossible for the signal to be continuously bad (Downtown and rural areas).

Macbook Air 2017 cannot enter the firmware password

I am currently running dual operating systems (Win10 + macOS). I want to switch from windows10 to macOS, so I turn off my laptop and start it with the saved option key. When I enter the page that enters the firmware password, I cannot write anything. The Capslock indicator can be changed, the combined key to display the hash code (Command + Shift + Option + S) can work. Except, nothing works.

I have tried the following steps but none of these works:
– Shut down and restart
– Make an SMC reset
– Make a NVRAM reset
– Start with the subject option button
– Start with Command + S
– Start with Command + R

I found a solution to use the Firmware Utility, but I cannot change the operating system. I can only use Windows 10. BootCamp on Windows only detected Windows10, macOS was not decreed.

Macos – Kernel panic MacBook Pro 2017 keeps restarting when you start Android Studio or Intellij

This is my full report. Can anybody help me? I want to know if it is possible to solve it.

panic (CPU call 1 0xffffff80060652fa): kernel trap in 0xffffff800600a348, type 14 = page error, records:
CR0: 0x0000000080010033, CR2: 0xffffff7f80179904, CR3: 0x00000002617ba053, CR4: 0x00000000003626e0
RAX: 0x0000000000005e64, RBX: 0x0000000000000003, RCX: 0x00000000000000c0, RDX: 0xffffff80068c42c0
RSP: 0xffffff81193f2f20, RBP: 0xffffff81193f2f60, RSI: 0xffffff80068c4200, RDI: 0xffffff80201080a8
R8: 0x00000000fff0ffff, R9: 0x000000000000004d, R10: 0xffffff80201080a8, R11: 0xffffff7f80000000
R12: 0x03fffffe021a310b, R13: 0xffffff7f80179900, R14: 0xffffff80200dd970, R15: 0xffffff80200eb970
RFL: 0x0000000000010202, RIP: 0xffffff800600a348, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2 fault: 0xffffff7f80179904, Error code: 0x0000000000000002, CPU fault: 0x1, PL: 2, VF: 5

Reverse trace (CPU 1), frame: return address
0xffffff81193f2980: 0xffffff8005f3bb2b
0xffffff81193f29d0: 0xffffff80060734d5
0xffffff81193f2a10: 0xffffff8006064f4e
0xffffff81193f2a60: 0xffffff8005ee2a40
0xffffff81193f2a80: 0xffffff8005f3b217
0xffffff81193f2b80: 0xffffff8005f3b5fb
0xffffff81193f2bd0: 0xffffff80066d2aa9
0xffffff81193f2c40: 0xffffff80060652fa
0xffffff81193f2dc0: 0xffffff8006064ff8
0xffffff81193f2e10: 0xffffff8005ee2a40
0xffffff81193f2e30: 0xffffff800600a348
0xffffff81193f2f60: 0xffffff8005ffcacf
0xffffff81193f3010: 0xffffff8005ffc6d6
0xffffff81193f33b0: 0xffffff8005fc231a
0xffffff81193f3420: 0xffffff800665353d
0xffffff81193f3530: 0xffffff80066513b9
0xffffff81193f3560: 0xffffff7f88e4d73f
0xffffff81193f38b0: 0xffffff7f88e4b0bb
0xffffff81193f3990: 0xffffff7f88e1af62
0xffffff81193f3a20: 0xffffff7f88e244dc
0xffffff81193f3a80: 0xffffff7f88e25ee9
0xffffff81193f3ac0: 0xffffff800666739b
0xffffff81193f3b10: 0xffffff7f88e260e2
0xffffff81193f3b60: 0xffffff8006670443
0xffffff81193f3ca0: 0xffffff8006022d12
0xffffff81193f3db0: 0xffffff8005f419d8
0xffffff81193f3e10: 0xffffff8005f18635
0xffffff81193f3e70: 0xffffff8005f2f0e5
0xffffff81193f3f00: 0xffffff800604b575
0xffffff81193f3fa0: 0xffffff8005ee3226
Kernel extensions in reverse trace:

     com.apple.iokit.IOAcceleratorFamily2(438.3.1)(66992525-3204-3CB0-8F03-4B70031B1CF2)@0xffffff7f88dfa000->0xffffff7f88ebdfff
        dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)(A243D030-19AC-30AA-AC70-6C786DF9E6CE)@0xffffff7f8704c000
        dependency: com.apple.iokit.IOPCIFamily(2.9)(ADD485B5-3EF8-37C4-B3C5-F86326E497A4)@0xffffff7f8692f000
        dependency: com.apple.iokit.IOSurface(269.6)(42377B3B-D14A-368E-820F-07E7EA666198)@0xffffff7f87410000
        dependency: com.apple.iokit.IOGraphicsFamily(569.4)(1F9B5D88-52DB-3A16-8373-4F608A3CB2D8)@0xffffff7f86c1f000
        dependency: com.apple.iokit.IOReportFamily(47)(988360A2-2E10-3014-A119-BE81BC045A10)@0xffffff7f86d81000

BSD process name corresponding to the current thread: WindowServer

Mac OS version:
19D76

Core Version:
Darwin Kernel Version 19.3.0: Thu January 9 8:58:23 PM PST 2020; root: xnu-6153.81.5 ~ 1 / RELEASE_X86_64
Kernel UUID: A8DDE75C-CD97-3C37-B35D-1070CC50D2CE
Core Slide: 0x0000000005c00000
Core text base: 0xffffff8005e00000
__HIB text base: 0xffffff8005d00000
System model name: MacBookPro14.1 (Mac-B4831CEBD52A0C4C)
System shutdown started: NO

Panic diags file available: YES (0x0)

System uptime in nanoseconds: 83606510813

Last kext uploaded in 7255507095:> AudioAUUC 1.70 (addr 0xffffff7f895b9000, size 32768)

loaded kexts:
com.intel.kext.intelhaxm 7.5.1
com.frescologic.ProxyFramebuffer 1.3.1
com.frescologic.ProxyVideoCard 1.3.1

AudioAUUC 1.70
@fileutil 20.036.15
! APlatformEnabler 2.7.0d0
AGPM 111.4.2
X86PlatformShim 1.0.0
@ filesystems.autofs 3.0
! AUpstreamUserClient 3.6.8
! AHDAHardwareConfigDriver 283.15
! AHDA 283.15
! AGraphicsDevicePolicy 4.7.2
@AGDCPluginDisplayMetrics 4.7.2
! AHV 1
| IOUserEthernet 1.0.1
AGDCBacklightControl 4.7.2
! TO! IPCHPMC 2.0.1
eficheck 1
! TO! IKBLGraphics 14.0.4
| IO! BSerialManager 7.0.3f5
! ABacklight 180.1
pmtelemetry 1
@Dont_Steal_Mac_OS_X 7.0.0
! TO! ISlowAdaptiveClocking 4.0.0
! AFIVRDriver 4.1.0
ACPI_SMC_PlatformPlugin 1.0.0
! TO! IKBLGraphicsFramebuffer 14.0.4
! AMCCSControl 1.13
! ACameraInterface 7.6.0
! ASMCLMU 212
! AGFXHDA 100.1.424
! AThunderboltIP 3.1.3
! AFileSystemDriver 3.0.1
! AVirtIO 1.0
@ filesystems.hfs.kext 522.0.9
@! AFSCompression.! AFSCompressionTypeDataless 1.0.0d1
@BootCache 40
@! AFSCompression.! AFSCompressionTypeZlib 1.0.0
! ATopCaseHIDEventDriver 3430.1
@ filesystems.apfs 1412.81.1
AirPort.BrcmNIC 1400.1.1
@ private.KextAudit 1.0
! ASmartBatteryManager 161.0.0
! AACPIButtons 6.1
! ARTC 2.0
! ASMBIOS 2.1
! AACPIEC 6.1
! AAPIC 1.7
$! AImage4 1
@ nke.applicationfirewall 303
$ TMSafetyNet 8
@! ASystemPolicy 2.0.0
| EndpointSecurity 1
@ kext.triggers 1.0
DspFuncLib 283.15
@ kext.OSvKernDSPLib 529
! AGraphicsControl 4.7.2
| IOAVB! F 800.17
! ASSE 1.0
| IO! BHost! CUARTTransport 7.0.3f5
| IO! BHost! CTransport 7.0.3f5
! AHDA! C 283.15
| IOHDA! F 283.15
! ABacklightExpert 1.1.0
@ plugin.IOgPTPPlugin 810.1
| IOEthernetAVB! C 1.1.0
@! AGPUWrangler 4.7.2
| IOSlowAdaptiveClocking! F 1.0.0
IOPlatformPluginLegacy 1.0.0
X86PlatformPlugin 1.0.0
IOPlatformPlugin! F 6.0.0d8
! ASMBusPCI 1.0.14d1
@! AGraphicsDeviceControl 4.7.2
| IOAccelerator! F2 438.3.1
! ASMBus! C 1.0.18d1
! TO! ILpssUARTv1 3.0.60
! TO! ILpssUARTCommon 3.0.60
! AOnboardSerial 1.0
| IONDRVSupport 569.4
| IOGraphics! F 569.4
! AThunderboltEDMSink 4.2.2
! AThunderboltDPOutAdapter 6.2.5
| IOAudio! F 300.2
@ vecLib.kext 1.2.0
| IOSerial! F 11
| IOSurface 269.6
@ filesystems.hfs.encodings.kext 1
! AActuatorDriver 3430.1
! AHIDKeyboard 209
! AHS! BDriver 3430.1
IO! BHIDDriver 7.0.3f5
| IO! B! F 7.0.3f5
| IO! BPacketLogger 7.0.3f5
! AMultitouchDriver 3430.1
! AInputDeviceSupport 3430.1
! AHSSPIHIDDriver 59
! AThunderboltDPInAdapter 6.2.5
! AThunderboltDPAdapter! F 6.2.5
! AThunderboltPCIDownAdapter 2.5.4
! AHPM 3.4.4
! TO! ILpssI2C! C 3.0.60
! AHSSPISupport 59
! AThunderboltNHI 5.8.6
| IOThunderbolt! F 7.6.0
! AXsanScheme 3
! TO! ILpssSpi! C 3.0.60
! TO! ILpssDmac 3.0.60
| IO80211! F 1200.12.2b1
mDNSOffloadUserClient 1.0.1b8
corecapture 1.0.4
| IOSkywalk! F 1
| IONVMe! F 2.1.0
! TO! ILpssGspi 3.0.60
! TO! ILpssI2C 3.0.60
usb.! UXHCIPCI 1.2
usb.! UXHCI 1.2
usb.! UHostPacketFilter 1.0
| IOUSB! F 900.4.2
! AEFINVRAM 2.1
! AEFIRuntime 2.1
| IOSMBus! F 1.1
| IOHID! F 2.0.0
$ quarantine 4
$ sandbox 300.0
@kext.! AMatch 1.0.0d1
DiskImages 493.0.0
! AFDEKeyStore 28.30
! AEffaceable! S 1.0
! AKeyStore 2
! UTDM 489.80.2
| IOSCSIBlockCommandsDevice 422.0.2
! ACredentialManager 1.0
KernelRelayHost 1
! ASEPManager 1.0.1
IOSlaveProcessor 1
| IOUSBMass! SDriver 157.40.7
| IOSCSIArchitectureModel! F 422.0.2
| IO! S! F 2.1
| IOUSBHost! F 1.2
! UHostMergeProperties 1.2
usb.! UCommon 1.0
! ABusPower! C 1.0
| CoreAnalytics! F 1
! AMobileFileIntegrity 1.0.5
@ kext.CoreTrust 1
| IOTimeSync! F 810.1
| IONworking! F 3.4
| IOReport! F 47
! AACPIPlatform 6.1
! ASMC 3.1.9
guard dog 1
| IOPCI! F 2.9
| IOACPI! F 1.4
@ kec.pthread 1
@ kec.corecrypto 1.0
@ kec.Libm 1

How many screens can I connect to MacBook Pro (13 inches, 2017, two Thunderbolt 3 ports)

You can plug a maximum of two monitors

The technical specifications give you detailed information about the capabilities of your specific model. In this case, your MacBook model – MacBook Pro 13-inch 2017 – has enough bandwidth to support two monitors at 4K or less or just one monitor at 5K.

The Thunderbolt information page gives you a general perspective of Thunderbolt's capabilities.

Internal union in 3 tables SQL Server 2017

I have three tables
1. Ordertable
2. Bill
3. Customers

In Ordertable I have the following columns

(*) represents the primary key here

The | Customer ID * c | Customer Name | Address | Contact number | Email |

In the order table I have the following columns

The | Order ID * | Order Status | Delivery Date | Manager ID | Customer ID | Sales Manager ID |
Where Order_status can contain "pending" for the pending order
And "completed" for the completed order

In the invoice table I have these columns

The | Invoice ID * | Order ID | Date | Amount |

Now I want to create a query that shows the completed order
data with internal union in these three like these rules

  1. Order_ID as OID of the order table
  2. Order_Status as order table status
  3. Delivery_Date as Date of the order table
  4. Customer_name as Customer table name
  5. Amount as invoice Amount of invoice table
    What I try is this query
select order_status Status,Order_ID OID,Delivery_date Date
from ordertable
inner join bill ON ordertable.order_id = bill.Order_id

and I received this error
Message 209, Level 16, State 1, Line 1
Ambiguous column name & # 39; Order_ID & # 39 ;.

I know that order_id is in both tables, but how can I solve this?
And also when I eliminate the error it disappeared, but in the result I only see two columns for Status and Date
but no OID and no invoice data
how can I do this ?

How to store daily records in the SQL Server 2017 database?

So, I am working on Angular + .NET Core Web Appliction with SQL Server 2017 as the database. Therefore, the new function requires that we have to store daily data of users who belong to all countries.

Example:

enter the description of the image here

and so…

Now, as the application grows, the number of users will also increase, making millions of records. I have to look for monthly, quarterly annual data from this table, which will take too much time to look for any queries I use. So, I want to ask what I can do to speed up the process of obtaining data quickly.
Also, can anyone tell me what better design can be given to this table?

NOTE: I am a beginner in database work and I have very little and limited knowledge.

The SSIS OData package fails in SQL Server 2017

Some time ago, I created several SSIS packages, in SSDT 2015, which were implemented in an SSIS instance of SQL Server 2016. They were scheduled with agent jobs and executed with basic authentication.

Currently, both in SSDT directly and in the instance of SQL 2016, everything works as expected. When I implemented them on a new SQL Server 2017 server, after changing the target data sources to the new server, I get the following:
SSIS error message
I have tried:

  • Running the package using Windows Auth using a proxy account
  • Running in 32 bit
  • Installation of the client component SDK (not installed on the server that previously worked)
  • The IE Proxy configuration was modified to guarantee access (connection to INTERNAL SharePoint)
  • The secured target version was configured in SQL Server 2017

I have tried almost everything that the first pages of Google have to offer in several different searches. I really don't know what to try next. Let me know if you have any suggestions on where to look or what to try.

Thank you.

boot – Is the MacBook Air SSD 2017 compatible with MacBook Air 11 "in mid-2013?

I need to change the SSD of my MacBook Air 11 "in mid-2013 and I was wondering if a newer MacBook Air 2017 would be compatible.
I researched online and I think the ports are still the same (12 + 16 pins), but I was wondering if there would be a problem with the unit and, if so, if it can be easily solved

visual studio 2017 – How to calculate a percentage in a report using telerik reporting librarry using a Crosstab

Thank you for contributing to StackOverflow in Spanish with an answer!

  • Please make sure answer the question. Provide information and share your research!

But avoid

  • Ask for help or clarification, or respond to other answers.
  • Make statements based on opinions; Be sure to back them up with references or with your own personal experience.

For more information, see our tips on how to write great answers.